Voltage: 3.3V–5V
Accuracy: <2.5 m
Update Rate: 1–10 Hz
Frequency: 1575.42 MHz
Baud Rate: 9600 bps
Communication: UART
GY-NEO-7M Module+External Antenna GPS Ceramic Antenna Module
KSh 1,300.00
The GY-NEO-7M GPS Module offers faster positioning, improved sensitivity, and enhanced noise resistance compared to earlier models. With its external ceramic antenna and high-sensitivity GNSS receiver, it achieves precise geolocation data even in areas with weak satellite signals. It’s a top choice for professional navigation, robotics, and mapping projects requiring dependable GPS performance.
Features
NEO-7M chipset with superior sensitivity (–165 dBm).
External ceramic antenna for consistent reception.
Built-in RTC crystal and backup battery.
Supports UBX and NMEA message formats.
Easy UART connectivity with 3.3–5V logic.
Applications
Vehicle telemetry and navigation
Autonomous robots and drones
Marine and land surveying
GPS-based data logging systems
Description
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Pick Up
Our shop location is Juja.
Pick up your product anytime
Monday - Friday 8:30 am - 5:00 pm
Delivery
Free delivery is available within a 5 km radius of the pick-up location.
Drop Off Times:
Monday - Friday 10:30 am - 3:00 pm.
Related products
5kg HX711 Weight Pressure Sensor (Sensor Module)
Original price was: KSh 400.00.KSh 350.00Current price is: KSh 350.00.
The 5kg HX711 Weight Pressure Sensor with Digital Display combines a precision load cell with an HX711 amplifier and digital screen for direct, real-time weight measurement. It delivers high accuracy and consistency for both industrial and DIY applications. The digital display enables instant visualization, while the HX711 ensures stable data output suitable for microcontroller integration.
FEATURES
High-sensitivity 5kg load cell
Integrated HX711 precision ADC amplifier
Compact and lightweight design
Excellent long-term stability
Simple 4-pin connection (VCC, GND, DT, SCK)
APPLICATIONS
Electronic scales and weight measurement systems
Industrial automation
Load testing in research and development
DIY IoT-based weighing projects
DHT11 Temperature and Humidity Sensor
KSh 300.00
DESCRIPTION
The DHT11 Temperature and Humidity Sensor is a low-cost digital sensor that measures ambient temperature and relative humidity with calibrated signal output. It’s widely used in environmental monitoring and smart automation systems due to its easy digital interface and compact design.
FEATURES
Measures both humidity and temperature simultaneously
Factory calibrated digital output for high reliability
Single-wire communication protocol
Low power consumption and simple integration
Ideal for real-time environmental monitoring
APPLICATIONS
Weather stations and climate monitoring
Smart home and HVAC control
IoT environment sensors
Agricultural and greenhouse monitoring
Color Sensor TSC 34725
Original price was: KSh 1,000.00.KSh 800.00Current price is: KSh 800.00.
The TCS34725 Color Sensor detects and measures the intensity of red, green, blue, and clear light. It features an IR-blocking filter for accurate color measurement under various lighting conditions. With an I²C communication interface and built-in white LED, it’s ideal for color recognition and display calibration tasks.
FEATURES
High-precision RGB + Clear light sensing
Built-in IR filter for enhanced accuracy
I²C interface for easy communication
Integrated white LED for consistent lighting
Wide dynamic range for accurate color detection
Application:
Color recognition and sorting robots
Display and lighting calibration
Smart lighting control systems
Optical detection and analysis systems
OF06ZAT BSP 3/4″ Precision Liquid Flow Meter Sensor
KSh 3,000.00
DESCRIPTION
The OF06ZAT BSP 3/4” Liquid Flow Meter Sensor measures the rate of liquid flow using a Hall-effect sensor that generates pulse signals proportional to the flow rate. Designed with high-precision components and a durable plastic housing, it ensures accurate readings for fluid automation and water management systems.
FEATURES
Hall-effect sensor for accurate pulse output
3/4” BSP threaded interface for easy installation
High sensitivity and low-pressure loss
Stable and reliable performance over long use
Compatible with Arduino and industrial controllers
APPLICATIONS
Water dispensing systems
Industrial flow measurement and control
Irrigation and fluid management
Smart home water monitoring systems
ZMCT103C Current Sensor 5A Single
KSh 450.00
DESCRIPTION
The ZMCT103C Current Sensor measures up to 5A AC with high accuracy. It’s ideal for energy monitoring, overcurrent protection, and power quality analysis.
APPLICATION
1. Non-Contact Measurement: Clamp-on design allows safe current measurement without touching the conductor.
2. Real-Time Monitoring: Provides live current readings for instant fault detection.
3. Overcurrent Protection: Protects the sensor and connected equipment from excessive current.
4. Easy Integration: Compatible with microcontrollers and monitoring systems for simple setup.
5. Galvanic Isolation: Hall-effect models provide electrical isolation for improved safety.
6. Compact Design: Small size enables installation in confined spaces.
7. Accurate Measurement: Delivers reliable AC current readings for monitoring and analysis.
8. Wide Applications: Suitable for energy monitoring, industrial equipment, power supplies, and renewable energy systems.
9. Cost-Effective: Affordable solution for both hobbyist and industrial projects.
10. User-Friendly Output: Provides analog or digital signals that are easy to process.
11. Durable Construction: Designed for long-term operation in demanding environments.
12. Flexible Outputs: Available with analog and/or digital output options to suit different systems.
ZMPT101B Voltage Transformer Module
KSh 400.00
DESCRIPTION
The ZMPT101B Voltage Transformer Module is a precision AC voltage sensing module designed for measuring single-phase AC voltages. It uses the ZMPT101B miniature voltage transformer and an onboard signal conditioning circuit to provide a scaled analog output that can be read by microcontrollers such as Arduino, ESP32, STM32, and Raspberry Pi Pico.
FEATURES
- Precision ZMPT101B voltage transformer.
- Suitable for single-phase AC voltage measurement.
- Adjustable gain via onboard potentiometer.
- Analog output for microcontroller ADC inputs.
- Good linearity and measurement consistency.
- Compact PCB design.
- Electrical isolation provided by the transformer.
- AC mains voltage monitoring.
- Energy monitoring systems.
- Smart home automation.
- Industrial monitoring and control.
- Power quality analysis.
- IoT-based electrical measurement projects.
360 Degrees Rotary Encoder Module
KSh 200.00
DESCRIPTION
This 360-degree rotary encoder enables continuous
rotation sensing for speed, direction, and rotational measurement in motion-control systems.
FEATURES
Unlimited rotational movement
Direction and speed detection
Digital output signals
Durable mechanical design
Easy microcontroller interfacing
APPLICATION
Motor speed measurement
Industrial control systems
Robotics feedback
Automation equipment
DIY electronics
AD8232 ECG Measurement Pulse Heart Sensor (kit)
KSh 1,400.00
DESCRIPTION
The AD8232 ECG sensor kit is designed for accurate electrical heart signal acquisition. It is ideal for wearable health monitoring, biomedical research, and educational medical electronics
FEATURES
High-precision ECG signal conditioning
Low power consumption
Integrated noise filtering
Analog output for waveform analysis
Compact and wearable-friendly design
APPLICATION
Heart rate monitoring systems
Wearable medical devices
Biomedical research
Fitness tracking
Educational health electronics
Reviews
There are no reviews yet.