SPECIFICATION
Operating Voltage: 5V
Sensor Type: Semiconductor gas sensor
Output: Analog / Digital
Warm-up Time: Required
New
MQ Series Gas Detection Module (Assorted) Sold Separate
KSh 300.00
DESCRIPTION
MQ series gas sensors are designed to detect various gases including smoke, LPG, methane, and alcohol. They are widely used in safety and environmental monitoring systems.
FEATURES
Wide gas detection range
High sensitivity
Analog and digital outputs
Long operational life
Easy calibration
APPLICATIONS
Gas leakage detection
Air quality monitoring
Industrial safety systems
Smart home alarms
Environmental monitoring
Description
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Pick Up
Our shop location is Juja.
Pick up your product anytime
Monday - Friday 8:30 am - 5:00 pm
Delivery
Free delivery is available within a 5 km radius of the pick-up location.
Drop Off Times:
Monday - Friday 10:30 am - 3:00 pm.
Related products
Voltage Detection Module
KSh 130.00
This Voltage Detection Module allows safe measurement of higher voltages by scaling them down for analog input compatibility with microcontrollers. Using a precision resistor divider circuit, it converts voltages up to 25V into measurable 0–5V signals. It’s commonly used for battery monitoring, solar power systems, and energy management projects.
FEATURES
Simple and safe voltage scaling circuit.
Analog output for microcontroller ADC input.
Compact, ready-to-use breakout module.
Stable, accurate readings.
Compatible with Arduino, ESP, and STM controllers.
APPLICATIONS
Battery and power-supply monitoring
Energy-usage tracking systems
Solar and renewable energy setups
IoT-based voltage logging
GY-NEO-7M Module+External Antenna GPS Ceramic Antenna Module
KSh 1,300.00
The GY-NEO-7M GPS Module offers faster positioning, improved sensitivity, and enhanced noise resistance compared to earlier models. With its external ceramic antenna and high-sensitivity GNSS receiver, it achieves precise geolocation data even in areas with weak satellite signals. It’s a top choice for professional navigation, robotics, and mapping projects requiring dependable GPS performance.
Features
NEO-7M chipset with superior sensitivity (–165 dBm).
External ceramic antenna for consistent reception.
Built-in RTC crystal and backup battery.
Supports UBX and NMEA message formats.
Easy UART connectivity with 3.3–5V logic.
Applications
Vehicle telemetry and navigation
Autonomous robots and drones
Marine and land surveying
GPS-based data logging systems
GY-NEO-8M Module+External Antenna. GPS Active Ceramic Antenna Module
KSh 1,500.00
The GY-NEO-8M is a next-generation GPS module offering exceptional positioning accuracy, faster satellite acquisition, and reduced power consumption. It uses an advanced u-blox 8 chipset and comes with an active ceramic antenna to maintain strong reception even in challenging conditions. Ideal for drones, precision agriculture, and advanced IoT applications where real-time accuracy is crucial.
Features
High-accuracy NEO-8M receiver with rapid lock-on.
Multi-satellite GNSS support for stable performance.
External active antenna for high-gain reception.
Low-power operation suited for mobile systems.
UART and I²C communication support.
Applications
Autonomous vehicles and drones
Fleet management systems
Precision timing systems
Geographic mapping and survey tools
Capacitive Soil Moisture Sensor
KSh 200.00
The Capacitive Soil Moisture Sensor is a highly reliable, corrosion-resistant sensor designed to measure the moisture content of soil using capacitive sensing technology. Unlike resistive sensors, it avoids electrolysis, ensuring long lifespan and stable readings. Its analog voltage output varies with the soil’s water content, making it an excellent choice for smart farming and automated irrigation systems.
DESCRIPTION
Capacitive sensing for long-term durability and corrosion resistance
Stable analog output proportional to soil moisture level
Wide operating voltage range (3.3V–5V) compatible with Arduino, ESP32, and Raspberry Pi
Waterproof PCB design for outdoor and greenhouse applications
Easy-to-interface 3-pin connector (VCC, GND, A out)
APPLICATIONS
Smart irrigation and plant monitoring systems
Precision agriculture and greenhouse control
Soil and crop research experiments
IoT-based environmental monitoring
DS18B20 Waterproof Temperature Probe Sensor
KSh 400.00
The DS18B20 Waterproof Temperature Sensor provides accurate digital temperature readings via a one-wire interface. Enclosed in a stainless-steel probe and sealed for moisture resistance, it’s suitable for outdoor, liquid, or industrial temperature measurement applications.
FEATURES
Waterproof stainless-steel probe for harsh environments
One-wire digital communication protocol
High precision and fast response
Long cable for remote sensing
Corrosion-resistant and durable design
APPLICATIONS
Industrial process control
Outdoor and weather sensing
Aquarium, greenhouse, and HVAC systems
Water and liquid temperature monitoring
Fingerprint Sensor
KSh 2,000.00
DESCRIPTION
The Fingerprint Sensor module provides secure biometric identification by capturing, processing, and matching fingerprints. It’s widely used in access control, attendance, and security systems. Its internal processor handles all image processing, making integration simple for developers.
FEATURES
Built-in DSP for image processing and matching
Fast and accurate fingerprint recognition
Stores up to 1000 fingerprints
UART serial interface for easy communication
Durable optical sensor with anti-scratch surface
APPLICATIONS
Biometric access control systems
Attendance and time-tracking devices
IoT security and smart locks
Robotics and smart home authentication
OF06ZAT BSP 3/4″ Precision Liquid Flow Meter Sensor
KSh 3,000.00
DESCRIPTION
The OF06ZAT BSP 3/4” Liquid Flow Meter Sensor measures the rate of liquid flow using a Hall-effect sensor that generates pulse signals proportional to the flow rate. Designed with high-precision components and a durable plastic housing, it ensures accurate readings for fluid automation and water management systems.
FEATURES
Hall-effect sensor for accurate pulse output
3/4” BSP threaded interface for easy installation
High sensitivity and low-pressure loss
Stable and reliable performance over long use
Compatible with Arduino and industrial controllers
APPLICATIONS
Water dispensing systems
Industrial flow measurement and control
Irrigation and fluid management
Smart home water monitoring systems
ZMPT101B Voltage Transformer Module
KSh 400.00
DESCRIPTION
The ZMPT101B Voltage Transformer Module is a precision AC voltage sensing module designed for measuring single-phase AC voltages. It uses the ZMPT101B miniature voltage transformer and an onboard signal conditioning circuit to provide a scaled analog output that can be read by microcontrollers such as Arduino, ESP32, STM32, and Raspberry Pi Pico.
FEATURES
- Precision ZMPT101B voltage transformer.
- Suitable for single-phase AC voltage measurement.
- Adjustable gain via onboard potentiometer.
- Analog output for microcontroller ADC inputs.
- Good linearity and measurement consistency.
- Compact PCB design.
- Electrical isolation provided by the transformer.
- AC mains voltage monitoring.
- Energy monitoring systems.
- Smart home automation.
- Industrial monitoring and control.
- Power quality analysis.
- IoT-based electrical measurement projects.
Reviews
There are no reviews yet.