SPECIFICATION
- Supply Voltage: 5V DC
- Output Type: Analog
- Voltage Transformer: ZMPT101B
- Frequency Range: 50Hz–60Hz AC mains applications
- Isolation: Transformer isolation between measured voltage and output circuit
New
ZMPT101B Voltage Transformer Module
KSh 400.00
DESCRIPTION
The ZMPT101B Voltage Transformer Module is a precision AC voltage sensing module designed for measuring single-phase AC voltages. It uses the ZMPT101B miniature voltage transformer and an onboard signal conditioning circuit to provide a scaled analog output that can be read by microcontrollers such as Arduino, ESP32, STM32, and Raspberry Pi Pico.
FEATURES
- Precision ZMPT101B voltage transformer.
- Suitable for single-phase AC voltage measurement.
- Adjustable gain via onboard potentiometer.
- Analog output for microcontroller ADC inputs.
- Good linearity and measurement consistency.
- Compact PCB design.
- Electrical isolation provided by the transformer.
APPLICATIONS
- AC mains voltage monitoring.
- Energy monitoring systems.
- Smart home automation.
- Industrial monitoring and control.
- Power quality analysis.
- IoT-based electrical measurement projects.
Description
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Pick Up
Our shop location is Juja.
Pick up your product anytime
Monday - Friday 8:30 am - 5:00 pm
Delivery
Free delivery is available within a 5 km radius of the pick-up location.
Drop Off Times:
Monday - Friday 10:30 am - 3:00 pm.
Related products
Voltage Detection Module
KSh 130.00
This Voltage Detection Module allows safe measurement of higher voltages by scaling them down for analog input compatibility with microcontrollers. Using a precision resistor divider circuit, it converts voltages up to 25V into measurable 0–5V signals. It’s commonly used for battery monitoring, solar power systems, and energy management projects.
FEATURES
Simple and safe voltage scaling circuit.
Analog output for microcontroller ADC input.
Compact, ready-to-use breakout module.
Stable, accurate readings.
Compatible with Arduino, ESP, and STM controllers.
APPLICATIONS
Battery and power-supply monitoring
Energy-usage tracking systems
Solar and renewable energy setups
IoT-based voltage logging
GY-NEO-6M Module+External Antenna. GPS Active Ceramic Antenna Module
KSh 800.00
The GY-NEO-6M GPS Module delivers precise position and timing data using signals from GPS satellites. Equipped with an external active ceramic antenna and backup battery, it ensures fast cold starts, stable signal reception, and reliable performance even in urban environments. It supports NMEA and UBX protocols, making it compatible with most microcontrollers and flight controllers for navigation and tracking applications.
FEATURES
High-performance NEO-6M GPS chipset.
External active antenna for strong signal reception.
Built-in backup battery for quick re-acquisition.
Onboard EEPROM for configuration storage.
UART interface for simple serial communication.
APPLICATIONS
Vehicle and asset tracking
Drones and autonomous navigation
Time synchronization
Mapping and surveying projects
GY-NEO-7M Module+External Antenna GPS Ceramic Antenna Module
KSh 1,300.00
The GY-NEO-7M GPS Module offers faster positioning, improved sensitivity, and enhanced noise resistance compared to earlier models. With its external ceramic antenna and high-sensitivity GNSS receiver, it achieves precise geolocation data even in areas with weak satellite signals. It’s a top choice for professional navigation, robotics, and mapping projects requiring dependable GPS performance.
Features
NEO-7M chipset with superior sensitivity (–165 dBm).
External ceramic antenna for consistent reception.
Built-in RTC crystal and backup battery.
Supports UBX and NMEA message formats.
Easy UART connectivity with 3.3–5V logic.
Applications
Vehicle telemetry and navigation
Autonomous robots and drones
Marine and land surveying
GPS-based data logging systems
GY-NEO-8M Module+External Antenna. GPS Active Ceramic Antenna Module
KSh 1,500.00
The GY-NEO-8M is a next-generation GPS module offering exceptional positioning accuracy, faster satellite acquisition, and reduced power consumption. It uses an advanced u-blox 8 chipset and comes with an active ceramic antenna to maintain strong reception even in challenging conditions. Ideal for drones, precision agriculture, and advanced IoT applications where real-time accuracy is crucial.
Features
High-accuracy NEO-8M receiver with rapid lock-on.
Multi-satellite GNSS support for stable performance.
External active antenna for high-gain reception.
Low-power operation suited for mobile systems.
UART and I²C communication support.
Applications
Autonomous vehicles and drones
Fleet management systems
Precision timing systems
Geographic mapping and survey tools
Capacitive Soil Moisture Sensor
KSh 200.00
The Capacitive Soil Moisture Sensor is a highly reliable, corrosion-resistant sensor designed to measure the moisture content of soil using capacitive sensing technology. Unlike resistive sensors, it avoids electrolysis, ensuring long lifespan and stable readings. Its analog voltage output varies with the soil’s water content, making it an excellent choice for smart farming and automated irrigation systems.
DESCRIPTION
Capacitive sensing for long-term durability and corrosion resistance
Stable analog output proportional to soil moisture level
Wide operating voltage range (3.3V–5V) compatible with Arduino, ESP32, and Raspberry Pi
Waterproof PCB design for outdoor and greenhouse applications
Easy-to-interface 3-pin connector (VCC, GND, A out)
APPLICATIONS
Smart irrigation and plant monitoring systems
Precision agriculture and greenhouse control
Soil and crop research experiments
IoT-based environmental monitoring
DHT11 Temperature and Humidity Sensor
KSh 300.00
DESCRIPTION
The DHT11 Temperature and Humidity Sensor is a low-cost digital sensor that measures ambient temperature and relative humidity with calibrated signal output. It’s widely used in environmental monitoring and smart automation systems due to its easy digital interface and compact design.
FEATURES
Measures both humidity and temperature simultaneously
Factory calibrated digital output for high reliability
Single-wire communication protocol
Low power consumption and simple integration
Ideal for real-time environmental monitoring
APPLICATIONS
Weather stations and climate monitoring
Smart home and HVAC control
IoT environment sensors
Agricultural and greenhouse monitoring
OF06ZAT BSP 3/4″ Precision Liquid Flow Meter Sensor
KSh 3,000.00
DESCRIPTION
The OF06ZAT BSP 3/4” Liquid Flow Meter Sensor measures the rate of liquid flow using a Hall-effect sensor that generates pulse signals proportional to the flow rate. Designed with high-precision components and a durable plastic housing, it ensures accurate readings for fluid automation and water management systems.
FEATURES
Hall-effect sensor for accurate pulse output
3/4” BSP threaded interface for easy installation
High sensitivity and low-pressure loss
Stable and reliable performance over long use
Compatible with Arduino and industrial controllers
APPLICATIONS
Water dispensing systems
Industrial flow measurement and control
Irrigation and fluid management
Smart home water monitoring systems
ZMCT103C Current Sensor 5A Single
KSh 450.00
DESCRIPTION
The ZMCT103C Current Sensor measures up to 5A AC with high accuracy. It’s ideal for energy monitoring, overcurrent protection, and power quality analysis.
APPLICATION
1. Non-Contact Measurement: Clamp-on design allows safe current measurement without touching the conductor.
2. Real-Time Monitoring: Provides live current readings for instant fault detection.
3. Overcurrent Protection: Protects the sensor and connected equipment from excessive current.
4. Easy Integration: Compatible with microcontrollers and monitoring systems for simple setup.
5. Galvanic Isolation: Hall-effect models provide electrical isolation for improved safety.
6. Compact Design: Small size enables installation in confined spaces.
7. Accurate Measurement: Delivers reliable AC current readings for monitoring and analysis.
8. Wide Applications: Suitable for energy monitoring, industrial equipment, power supplies, and renewable energy systems.
9. Cost-Effective: Affordable solution for both hobbyist and industrial projects.
10. User-Friendly Output: Provides analog or digital signals that are easy to process.
11. Durable Construction: Designed for long-term operation in demanding environments.
12. Flexible Outputs: Available with analog and/or digital output options to suit different systems.
Reviews
There are no reviews yet.