DHT11 Temperature and Humidity Sensor
KSh 300.00
DESCRIPTION
The DHT11 Temperature and Humidity Sensor is a low-cost digital sensor that measures ambient temperature and relative humidity with calibrated signal output. It’s widely used in environmental monitoring and smart automation systems due to its easy digital interface and compact design.
FEATURES
Measures both humidity and temperature simultaneously
Factory calibrated digital output for high reliability
Single-wire communication protocol
Low power consumption and simple integration
Ideal for real-time environmental monitoring
APPLICATIONS
Weather stations and climate monitoring
Smart home and HVAC control
IoT environment sensors
Agricultural and greenhouse monitoring
DS18B20 Waterproof Temperature Probe Sensor
KSh 400.00
The DS18B20 Waterproof Temperature Sensor provides accurate digital temperature readings via a one-wire interface. Enclosed in a stainless-steel probe and sealed for moisture resistance, it’s suitable for outdoor, liquid, or industrial temperature measurement applications.
FEATURES
Waterproof stainless-steel probe for harsh environments
One-wire digital communication protocol
High precision and fast response
Long cable for remote sensing
Corrosion-resistant and durable design
APPLICATIONS
Industrial process control
Outdoor and weather sensing
Aquarium, greenhouse, and HVAC systems
Water and liquid temperature monitoring
Dual Output Fully Isolated AC-DC Switching Power Supply Module
KSh 2,500.00
A high-efficiency AC-DC switching power module that provides two fully isolated DC outputs. It’s ideal for industrial control systems, communication equipment, and embedded projects requiring safe and reliable dual power rails.
Features
Dual isolated DC outputs for flexible power design
Wide AC input voltage range
High conversion efficiency
Built-in overload and short-circuit protection
Compact and robust design for long-term use
ApplicationsÂ
CCTV, Industry, Laboratory, Led Lighting, 3D Printer
ESP 32 and Breadboard holder kit
KSh 2,250.00
This 3D printed ESP 32 holder from integral makers bring convenience to every maker, by combining the 400 hole breadboard with Keyestudio ESP32 PLUS Development Board. The breadboard is attached via the adhesive surface on the back. The microcontroller is attached using the enclosed screws, Very convenient having the Arduino and a small breadboard together on a stable platform. This kit helps to keep peripheral components & wiring straight and neat during development. It is a simple way of keeping everything together and provides a quick and easy method for keeping hardware neat and tidy.
Features
The Keyestudio ESP32 PLUS Development Board, is a universal WIFI plus Bluetooth development board based on ESP32, integrated with ESP32-WOROOM-32 module and compatible with Arduino. Pins Exposed for ease of connection.
It has a hall sensor, high-speed SDIO/SPI, UART, I2S as well as I2C. Furthermore, equipped with free RTOS operating system, which is quite suitable for the Internet of things and smart home.
ESP32 (32pin) :WIFI Bluetooth
KSh 1,500.00
This 32-pin ESP32 development board is a compact module for IoT, automation, and smart electronics projects. It integrates Wi-Fi and Bluetooth connectivity in a smaller form factor, suitable for portable devices.
Features
Dual-core 32-bit LX6 processor
32 GPIO pins supporting multiple interfaces
Integrated Wi-Fi (2.4 GHz) and Bluetooth
Low-power operation modes
Compatible with Arduino IDE and MicroPython
ApplicationsÂ
IoT devices and smart appliances
Wireless sensor modules
Home automation and robotics
Portable electronics requiring Wi-Fi/Bluetooth
ESP32 38pin
KSh 1,450.00
The ESP32 38-pin development board is a high-performance microcontroller with integrated Wi-Fi and Bluetooth capabilities. It provides multiple GPIO pins for complex IoT and embedded applications.
Features
Dual-core Tensilica LX6 CPU 38 GPIO pins with analog, digital, and PWM support Built-in Wi-Fi and Bluetooth 4.2 Supports Arduino IDE, MicroPython, and ESP-IDF Low power consumption and sleep modes.
Applications
IoT devices and smart home projects.
Wireless sensor networks
Wearable electronics
Embedded system prototyping"
ESP32-CAM-MB Micro USB Programmer USB-TTL TYPE C
KSh 850.00
ESP32-CAM-MB is a simple board, that utilizes the CH340G USB-to-UART chip for the Serial Communication between your computer and ESP32-CAM board.
Features:
- Expansion shield for ESP32 S-CAM MB
- Includes Onboard CH340C USB to serial chip
- Type C USB
- With on board Download and RESET button
- 1 x USB-TTL Serial Download Module for ESP32 S-CAM MB Development Programming Board
Fingerprint Sensor
KSh 2,000.00
DESCRIPTIONÂ
The Fingerprint Sensor module provides secure biometric identification by capturing, processing, and matching fingerprints. It’s widely used in access control, attendance, and security systems. Its internal processor handles all image processing, making integration simple for developers.
FEATURES
Built-in DSP for image processing and matching
Fast and accurate fingerprint recognition
Stores up to 1000 fingerprints
UART serial interface for easy communication
Durable optical sensor with anti-scratch surface
APPLICATIONSÂ Â Â Â
Biometric access control systems
Attendance and time-tracking devices
IoT security and smart locks
Robotics and smart home authentication
G1/2 DN15 Solenoid Valve DC12V non-pressure NC
KSh 800.00
DESCRIPTION
Low-voltage DC solenoid valve for controlling water, air, or other liquids in small automated systems.
FEATURES
Normally closed configuration.
Quick response time.
Compact and lightweight design.
Easy to connect to Arduino or other controllers.
Suitable for low-pressure fluid systems.
APPLICATION
Automated water taps
Small irrigation systems
DIY fluid control projects
Laboratory automation
Robotic liquid handling
G3/4 DN20 Plastic Solenoid Valve Inlet Water Discharge Valve
KSh 900.00
The G3/4 DN20 Plastic Solenoid Valve is a normally closed, electrically actuated valve designed for automatic water control. It’s ideal for liquid flow regulation in smart dispensers, irrigation systems, and fluid automation setups.
Features
Durable plastic body with corrosion resistance
Normally closed type, opens when powered
Suitable for clean water and low-viscosity fluids
Fast response and long operational life
Easy integration with Arduino and relay modules
Applications
Water dispensers and filtration systems
Smart irrigation and automation
Fluid control systems
Automatic washing or refill machines