G3/4 DN20 Solenoid Valve AC220V non-pressure NC
KSh 1,000.00
DESCRIPTIONÂ
High-quality AC solenoid valve designed for
controlling larger fluid flows in automation projects.
FEATURES
Normally closed design.
Fast actuation with electromagnetic coil.
Strong metal construction.
Reliable for intermittent operation.
Easy to mount and wire.
APPLICATION
Water or air flow control
Automated irrigation systems
Industrial small-scale automation
Laboratory fluid control
Home automation projects
G3/4 DN20 Solenoid Valve DC12V non-pressure NC
KSh 900.00
DESCRIPTIONÂ
12V DC normally closed solenoid valve for
controlling liquid or gas flow in small automation systems.
FEATURES
Fast response linear actuation.
Normally closed operation for safety.
Compact and robust metal construction.
Easy integration with controllers.
Suitable for water, air, and low-pressure fluids.
APPLICATIONSÂ
Water dispensing systems
Automated irrigation
Home automation valves
Laboratory fluid control
Small industrial machines
GY-NEO-6M Module+External Antenna. GPS Active Ceramic Antenna Module
KSh 800.00
The GY-NEO-6M GPS Module delivers precise position and timing data using signals from GPS satellites. Equipped with an external active ceramic antenna and backup battery, it ensures fast cold starts, stable signal reception, and reliable performance even in urban environments. It supports NMEA and UBX protocols, making it compatible with most microcontrollers and flight controllers for navigation and tracking applications.
FEATURES
High-performance NEO-6M GPS chipset.
External active antenna for strong signal reception.
Built-in backup battery for quick re-acquisition.
Onboard EEPROM for configuration storage.
UART interface for simple serial communication.
APPLICATIONS
Vehicle and asset tracking
Drones and autonomous navigation
Time synchronization
Mapping and surveying projects
GY-NEO-7M Module+External Antenna GPS Ceramic Antenna Module
KSh 1,300.00
The GY-NEO-7M GPS Module offers faster positioning, improved sensitivity, and enhanced noise resistance compared to earlier models. With its external ceramic antenna and high-sensitivity GNSS receiver, it achieves precise geolocation data even in areas with weak satellite signals. It’s a top choice for professional navigation, robotics, and mapping projects requiring dependable GPS performance.
Features
NEO-7M chipset with superior sensitivity (–165 dBm).
External ceramic antenna for consistent reception.
Built-in RTC crystal and backup battery.
Supports UBX and NMEA message formats.
Easy UART connectivity with 3.3–5V logic.
Applications
Vehicle telemetry and navigation
Autonomous robots and drones
Marine and land surveying
GPS-based data logging systems
GY-NEO-8M Module+External Antenna. GPS Active Ceramic Antenna Module
KSh 1,500.00
The GY-NEO-8M is a next-generation GPS module offering exceptional positioning accuracy, faster satellite acquisition, and reduced power consumption. It uses an advanced u-blox 8 chipset and comes with an active ceramic antenna to maintain strong reception even in challenging conditions. Ideal for drones, precision agriculture, and advanced IoT applications where real-time accuracy is crucial.
Features
High-accuracy NEO-8M receiver with rapid lock-on.
Multi-satellite GNSS support for stable performance.
External active antenna for high-gain reception.
Low-power operation suited for mobile systems.
UART and I²C communication support.
Applications
Autonomous vehicles and drones
Fleet management systems
Precision timing systems
Geographic mapping and survey tools
HC-SR501 Infrared Human Motion Module (Blue)
KSh 200.00
The HC-SR501 PIR (Passive Infrared) Motion Sensor Module is a reliable and widely used human-motion detection unit that identifies movement through changes in infrared radiation. Its dual-element sensing system detects body heat and motion within a configurable range, making it ideal for security, lighting control, and automation systems. With adjustable sensitivity and time delay, the module offers flexibility and high stability
in both indoor and outdoor settings.
FEATURES
Adjustable detection range and trigger delay. Wide detection angle and fast response. Built-in Fresnel lens for enhanced sensitivity.
Digital output for microcontroller or relay control. Compact, energy-efficient design.
APPLICATIONS
Intrusion and motion detection systems
Smart lighting and power management
Automated entry systems
Energy-saving devices
HX711 Weight Pressure Sensor (Digital display)
KSh 400.00
This module is the Digital Display for the HX711 based Weight Pressure Sensor. The system combines a precision load cell with an HX711 amplifier and digital screen for direct, real-time weight measurement. It delivers high accuracy and consistency for both industrial and DIY applications. This digital display enables instant visualization, while the HX711 ensures stable data output suitable for microcontroller integration.
Applications
Smart electronic weighing scales
Force measurement systems
Industrial automation and IoT load sensing
Robotic arm and pressure testing systems
Integral Makers Robot car Chassis with UNO R3 Motor PLUS (68mm 4WD)
Original price was: KSh 6,700.00.KSh 5,500.00Current price is: KSh 5,500.00.
The integral-makers 4WD robot car metal chassis is designed for basic robot tests like line following, obstacle avoidance and autonomous control. There are a wide variety of opensource codes for Scratch, Mixly, Arduino and Python for you to experiment with the car. Additional sensors can be added to the chassis making the possibilities endless.
Integral makers Robot-car Metal Chassis with UNO R3 Motor PLUS (86mm 4WD)
Original price was: KSh 7,350.00.KSh 6,850.00Current price is: KSh 6,850.00.
The 4WD robot car metal chassis by integral-makers, comers with larger wheels (86mm) designed for robot enthusiast. Designed to run on more powerful 3 lithium cells for more rugged and off-road autonomous use.
There are a wide variety of opensource codes for Scratch, Mixly, Arduino and Python for you to experiment with the car. Additional sensors can be added to the chassis making the possibilities endless.
JT308 USB RFID Card Reader
KSh 1,150.00
DESCRIPTIONÂ
The JT308 USB RFID card reader provides a plug-
and-play solution for reading RFID cards via USB, eliminating the need for additional drivers or microcontroller integration.
FEATURES
USB plug-and-play operation
Fast card reading response
No external power required
Compact desktop design
High compatibility with PC systems
APPLICATIONSÂ
PC-based access control
Attendance systems
Identity verification
Desktop RFID applications
Office security systems
Keyestudio ESP32 PLUS Board
Original price was: KSh 2,000.00.KSh 1,950.00Current price is: KSh 1,950.00.
The Keyestudio ESP32 PLUS Board is an enhanced ESP32 board board based on ESP32, integrated with ESP32-WOROOM-32 module designed for IoT projects and advanced electronics prototyping. It combines high processing power with extensive GPIO pins for multiple sensors and actuators.
It has a hall sensor, high-speed SDIO/SPI, UART, I2S as well as I2C. Furthermore, equipped with freeRTOS operating system, which is quite suitable for the Internet of things and smart home.
Features
Dual-core Tensilica LX6 CPU
High number of GPIO pins (supports ADC, PWM, SPI, I2C)
Built-in Wi-Fi and Bluetooth 4.2
Supports Arduino IDE, ESP-IDF, and MicroPython
Robust power management and low-power modes
Keyestudio UNO Motor PLUS Board
KSh 2,150.00
The Keyestudio UNO Motor PLUS Board is an Arduino-compatible development board with integrated motor control capabilities. It simplifies the design of motor-driven robotics projects and small automation systems.
Features
Based on the ATmega328P microcontroller Onboard motor driver circuitry (DC and stepper motors) 14 digital I/O pins and 6 analog inputs Compatible with Arduino IDE. Easy integration for robotics projects small robotics projects Motorized prototypes and vehicles.
Applications
Educational STEM kits
Automation projects with motor control