Dupont Wire: 24AWG PVC Electronic Wire (hard)，Male to male，Grey，20cm
KSh 100.00
A strong 24AWG grey jumper wire featuring durable PVC insulation for reliable, semi-rigid electrical connections. The 20cm length provides extra flexibility while maintaining circuit stability. Ideal for semi-permanent installations or classroom electronics setups.
Tough PVC jacket provides rigidity and form retention
Long-lasting and easy to handle
Firm and stable male pin ends
Consistent electrical conductivity
Breadboard wiring for extended connections
Power and signal transmission lines
Robotics, sensor, and microcontroller circuits
7* 9cm Double-Sided PCB Board
KSh 70.00
This 7×9 cm double-sided prototyping PCB board provides a reliable platform for assembling and testing circuits. Both sides are coated with copper, allowing versatile routing and soldering. Ideal for electronic engineers and hobbyists developing custom circuits.
Features
Double-sided copper layer for flexible routing
FR4 fiberglass construction for durability
Compatible with 2.54mm pitch components
Precision-drilled holes for stable soldering
High thermal stability and low warpage
Applications
Prototype circuit assembly
DIY electronics and testing
Custom project boards
Embedded system development
PH2.0mm JST male connector 5P10cm
KSh 25.00
This 5-pin PH2.0mm cable is designed for compact electronic assemblies requiring multi-channel signal and power connections. It ensures stable transmission, flexibility, and long-term durability in embedded systems.
Features
5-pin configuration for multiple signals
Ready-to-use pre-crimped cable
Compact and flexible wire design
High mechanical strength and insulation
Easy to connect and disconnect
Applications
Multi-sensor interfaces
Data and control connections
Prototyping and IoT modules
Robotics and automation boards
PH2.0mm JST male connector 4P10cm
KSh 25.00
The 4-pin PH2.0mm electronic wire harness is designed for secure and efficient multi-signal connections between modules, displays, and sensors. Its pre-crimped connectors ensure reliable performance with minimal signal interference.
Features
4-pin connector at both ends
Plug-and-play ready for rapid assembly
High mechanical flexibility
Robust PVC insulation
Vibration-resistant connector fit
Applications
Module-to-board communication
Serial data transfer
LED, display, or sensor wiring
Compact embedded systems
PH2.0mm JST Male Connector Wire 3P (10cm)
KSh 20.00
This 3-pin PH2.0mm connector wire ensures clean, reliable electrical connections in low-power digital and analog systems. It is commonly used for I2C, UART, or three-pin module interfacing, offering both flexibility and signal stability.
Features
3-pin female connector on each end
Soft, durable insulation
Compact, lightweight design
Ready for plug-and-play integration
Color-coded leads for easy identification
Applications
Sensor and module interfacing
Communication module wiring
Robotics and automation kits
Prototyping and DIY electronics
PH2.0mm JST Connector Wire 2P
Price range: KSh 15.00 through KSh 25.00
This 2-pin PH2.0mm female wire is a pre-crimped, ready-to-use cable designed for compact power and data connections. It provides a stable, vibration-resistant interface for microcontrollers, sensors, and modules.
Its flexible copper core and durable insulation make it ideal for repetitive prototyping and compact embedded systems.
Features
2-pin PH2.0 connector on one end
High-conductivity copper wire
Compact and flexible for tight enclosures
Pre-crimped, plug-and-play design
Resistant to wear and repeated use
Applications
Power and signal connection in sensors
Battery and module interface
IoT and robotics wiring
Compact development boards
2EDG 5.08mm KF2EDG 10P Bent Pin Pluggable Terminal Block
KSh 100.00
This 10-pin 5.08mm terminal block with bent pins ensures secure and organized wire connections for high-density circuit boards. Ideal for modular wiring and quick assembly.
10-pin angled connector
Detachable for maintenance
Flame-retardant material
Secure screw terminals
Compact and durable
Electrical control systems
PCB wiring interfaces
Modular automation projects
Robotics and mechatronic circuits
2EDG 5.08mm KF2EDG10P Straight Pin Pluggable Terminal Block
KSh 100.00
A 10-pin straight pin terminal block designed for modular wire connections with easy maintenance. It offers firm and vibration-resistant contact suitable for multi-channel wiring applications.
10-pin straight pin layout
Strong clamping mechanism
Easy pluggable interface
High dielectric strength
Stable electrical performance
Multi-channel signal systems
Power supply terminals
Control and relay boards
Industrial automation equipment
2EDG 5.08mm KF2EDG 2P Bent Pin Pluggable Terminal Block
KSh 25.00
This 2-pin 5.08mm bent pin pluggable terminal block provides a secure and removable electrical connection between wires and circuit boards. Its angled pin design allows compact placement and easy access in tight enclosures.
Features
2-pin bent pin configuration
Compact, space-saving design
Reliable clamping connection
Flame-retardant housing for safety
Easy plug-and-unplug functionality
Applications
Control panels and power distribution
PCB wire-to-board connections
Industrial automation devices
Embedded electronics systems
2EDG 5.08mm KF2EDG4P Hole seat Pluggable Terminal Block
KSh 50.00
A high-quality 4-pin 2EDG 5.08mm pluggable terminal block designed for easy wire-to-board connections.
It allows quick installation and removal of wires, making it ideal for power and signal transmission in electronic and industrial control applications.
Features
4-pin configuration with 5.08mm pitch
Screw-type wire locking mechanism
Safe and reliable electrical contact
Detachable plug for easy maintenance
Durable housing for long service life
Applications
Power supply connections
Industrial control systems
Signal and data interfaces
PCB terminal connections
Automation equipment
DC 9V 2560 Battery Button Power plug
Price range: KSh 20.00 through KSh 30.00
A 9V battery connector with a DC barrel plug designed to power Arduino UNO, Mega2560, and other compatible boards.
It provides a simple way to power your projects using standard 9V batteries.
Features
Snap-on connector for 9V batteries
Fitted with DC barrel plug for direct Arduino use
Flexible and durable wire design
Easy and secure connection
Compact and lightweight
Applications
Powering Arduino and other development boards
Portable electronics and test setups
Educational and prototype projects
Small IoT devices