PH2.0mm JST Male Connector Wire 3P (10cm)
KSh 20.00
This 3-pin PH2.0mm connector wire ensures clean, reliable electrical connections in low-power digital and analog systems. It is commonly used for I2C, UART, or three-pin module interfacing, offering both flexibility and signal stability.
Features
3-pin female connector on each end
Soft, durable insulation
Compact, lightweight design
Ready for plug-and-play integration
Color-coded leads for easy identification
Applications
Sensor and module interfacing
Communication module wiring
Robotics and automation kits
Prototyping and DIY electronics
PH2.0mm JST Connector Wire 2P
Price range: KSh 15.00 through KSh 25.00
This 2-pin PH2.0mm female wire is a pre-crimped, ready-to-use cable designed for compact power and data connections. It provides a stable, vibration-resistant interface for microcontrollers, sensors, and modules.
Its flexible copper core and durable insulation make it ideal for repetitive prototyping and compact embedded systems.
Features
2-pin PH2.0 connector on one end
High-conductivity copper wire
Compact and flexible for tight enclosures
Pre-crimped, plug-and-play design
Resistant to wear and repeated use
Applications
Power and signal connection in sensors
Battery and module interface
IoT and robotics wiring
Compact development boards
2EDG 5.08mm KF2EDG 10P Bent Pin Pluggable Terminal Block
KSh 100.00
This 10-pin 5.08mm terminal block with bent pins ensures secure and organized wire connections for high-density circuit boards. Ideal for modular wiring and quick assembly.
10-pin angled connector
Detachable for maintenance
Flame-retardant material
Secure screw terminals
Compact and durable
Electrical control systems
PCB wiring interfaces
Modular automation projects
Robotics and mechatronic circuits
2EDG 5.08mm KF2EDG10P Straight Pin Pluggable Terminal Block
KSh 100.00
A 10-pin straight pin terminal block designed for modular wire connections with easy maintenance. It offers firm and vibration-resistant contact suitable for multi-channel wiring applications.
10-pin straight pin layout
Strong clamping mechanism
Easy pluggable interface
High dielectric strength
Stable electrical performance
Multi-channel signal systems
Power supply terminals
Control and relay boards
Industrial automation equipment
2EDG 5.08mm KF2EDG 2P Bent Pin Pluggable Terminal Block
KSh 25.00
This 2-pin 5.08mm bent pin pluggable terminal block provides a secure and removable electrical connection between wires and circuit boards. Its angled pin design allows compact placement and easy access in tight enclosures.
Features
2-pin bent pin configuration
Compact, space-saving design
Reliable clamping connection
Flame-retardant housing for safety
Easy plug-and-unplug functionality
Applications
Control panels and power distribution
PCB wire-to-board connections
Industrial automation devices
Embedded electronics systems
2EDG 5.08mm KF2EDG4P Hole seat Pluggable Terminal Block
KSh 50.00
A high-quality 4-pin 2EDG 5.08mm pluggable terminal block designed for easy wire-to-board connections.
It allows quick installation and removal of wires, making it ideal for power and signal transmission in electronic and industrial control applications.
Features
4-pin configuration with 5.08mm pitch
Screw-type wire locking mechanism
Safe and reliable electrical contact
Detachable plug for easy maintenance
Durable housing for long service life
Applications
Power supply connections
Industrial control systems
Signal and data interfaces
PCB terminal connections
Automation equipment
DC 9V 2560 Battery Button Power plug
Price range: KSh 20.00 through KSh 30.00
A 9V battery connector with a DC barrel plug designed to power Arduino UNO, Mega2560, and other compatible boards.
It provides a simple way to power your projects using standard 9V batteries.
Features
Snap-on connector for 9V batteries
Fitted with DC barrel plug for direct Arduino use
Flexible and durable wire design
Easy and secure connection
Compact and lightweight
Applications
Powering Arduino and other development boards
Portable electronics and test setups
Educational and prototype projects
Small IoT devices
LM2596 DC-DC 3V-40V Adjustable Step Down Power Supply Module
KSh 200.00
The LM2596 Step Down (Buck) Converter is a versatile DC-DC module used to reduce higher input voltages to stable lower outputs. It’s widely used in embedded systems, power supplies, and Arduino-based projects.
Features
Adjustable output voltage using potentiometer
High efficiency and low heat generation
Wide input voltage range
Over-temperature and short-circuit protection
Compact module size
Applications
Power supply for Arduino and microcontrollers
Battery charging circuits
LED lighting systems
DIY and embedded electronic projects
2×18650 Battery Case with Wire
Price range: KSh 80.00 through KSh 100.00
A sturdy 2-cell battery holder for 18650 lithium-ion batteries. It securely holds two batteries in series or parallel configurations and includes pre-soldered wires for easy integration into circuits and projects.
Feature
Fits standard 18650 batteries
Pre-soldered leads for easy connection
Durable ABS plastic housing
Compact and lightweight design
Reliable spring-loaded terminals
Applications
Portable power supplies
DIY electronics and robotics
Power banks and flashlights
Battery-powered IoT devices
XL6009 DC-DC Adjustable Boost Module
KSh 250.00
A high-efficiency step-up (boost) converter module based on the XL6009 IC, capable of increasing input voltage to a higher, stable DC output. Ideal for battery-powered applications that require voltage boosting.
Features
Adjustable output voltage via onboard potentiometer
Wide input voltage range
High conversion efficiency up to 94%
Integrated power MOSFET for stability
Compact and easy to integrate
Applications
Battery-powered devices
Solar charging systems
Step-up power supply circuits
LED drivers and portable electronics
3.3V 5V MB102 Breadboard Power Supply Module
KSh 150.00
This MB102 Breadboard Power Supply Module provides a convenient and reliable power source for breadboard prototyping. It can output both 3.3V and 5V, ideal for Arduino, ESP, and sensor-based projects. It easily connects to standard 830-point breadboards.
Features
Dual output: 3.3V and 5V selectable
Direct plug-in for MB102 breadboards
On/Off power switch for convenience
Independent channel voltage selection
USB and DC jack input options
Applications
Breadboard prototyping and testing
Arduino and ESP32 projects
Powering sensors and small circuits
Educational and DIY electronics